Wireless Bridge,5.8GHz 300Mkbps Outdoor CPE Network Extender,Point to Point Access PTP/PTMP Plug & Play Long Range WiFi Extender with High Gain Antenna for Internet or Video Surveillance

$89.99
In stock
SKU
CPE320
  • [Point to Point Wireles Bridge]:CPE320 is a 5.8G long range wifi extender which comply with the IEEE802.11a and IEEE802.11n standards to ensure interoperability.The 5.8G wireless bridge outdoor is capble sharing internet to remote location up to 2KM(Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process.It is a simple,easy and professional way for long range wireless coverage,data transmit,wireless monitoring
  • Easy to Installation - Pre-paired Wireless Bridge CPE Kit with build in 10dBi panel antenna,the transmit/receive (point to point) wireless distance more than 2KM.suitable for long range video transmission point to point wifi cover,It support Wireless AP, Wireless Repeater,Bridge mode,default Pre-program WDS mode,no need seting,it can work two unit at the same time,no need long cable for connect to camera with your PC
  • Long Range Transmission Distance - Up to 2km (visible unobstructed environment), actual application distance should be less than 2KM. Built-in 10DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house
  • Widely Applications - Any place required cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitornetworks.Outdoor CPE Connect an IP Wireless Camera to a secondary port and utilize its long-range connectivity to send video back through the wireless network for extended coverage
  • Built for Outdoor Wi-Fi Coverage - IP66-rated weatherproof housing that ensures continued operation on harsh outdoor environments or in climates of extreme cold,heat or continuous moisture.Lightning Protection,Waterproof,Dustproof,Antifreeze,High-Temperature Resistant,With software-enabled PoE output,the secondary Ethernet port can power an external device,such as a PoE security camera,for seamless IP video integration

Extend your network from one building to another without wire connection

wireless bridge cpe320

With this 5.8G wireless bridge, you can extend your home internet network to a long distance, which means you can share your WiFi to your Barn Garage and warehouse. Enterprises can use this bridge to share the network from different offices, workshops, warehouses, ect.

CPE320 Kits Function:

A. the device can works as Auto pairing mode: simply to use, connect both bridges to the PoE power adapter to start working, it will auto pair in few minutes. Customize mode: need connect the bridges to the computer through ethernet cable, and configure the master & slave parameters, this mode suit for experienced technician.

B. the device can use for share internet networks to a long distance, output WiFi hot point, also can use for transmit the long ranges IP cameras' video stream to the control center without complicated wiring connection.

C. Auto pairing mode works for point-to-point access connection, customize mode can configure the point to multiple point connection.

CPE320 Kits Application:

1. Share internet networks to a longer distance, the master bridge gets internet and transfer to slave which can connect to router or computer

2. Outdoor access point, the master bridge connects to internet source and output WiFi hot point transmit up to 1.8miles & 60 degrees angle, you can get access the WiFi hot point in this area.

3. Connect the IP cameras from another building without wire connection, you can management the different place IP cameras in one DVR system.

4. Point to multiple point access, you can connect multiple slave bridges, to management more than one building's IP cameras in one DVR system.

Point to Point WiFi Internet Access

wifi access point

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the router through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the computer or router by another ethernet cable

Point to Point Video Surveillance

point to point video surveillance

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the switch by another ethernet cable

Point-to-Multiple Point Connection for Video Surveillance

point to multiple point

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the IP cameras by another ethernet cable

CPE320 Wireless Bridge Interface

wireless bridge interface

Overview

The wireless bridges work by two modes, auto pairing mode with pre-programmed suit for newbie and customize mode suit for experienced user.

Auto pairing mode:

Connect the bridges to the PoE power adapter, the Power LED lamp turns green, system is power on, when both bridges are power on, they will auto pair in a few minutes, during the pairing the LAN status LED lamps all turn green. The digital LED indicator displays the numeric in red color.

You can find a good frequency without interference by pressing the "RST" button to change the channel, short press the button, the LED indicator will display the numeric "0","1","2","3"..."F" one by one, and change in cycle, each numeric means a different frequency, you can find the details in the user manual.

At the auto pairing mode, the bridge also output WiFi hot point, and the access password is pre-programmed in auto paring mode. When the channel changes, the access password changes as well. For example: the WiFi hot point name is CPE5G_5G161, and the default password is zllinkcpe123456161, if the name is CPE5G_5G153, the password will be zllinkcpe123456153. The last three numbers of the password must match the last three numbers of the name.

Customize mode:

At this mode the bridged must be connected to the computer and set different IP addresses and working modes, short press the "RST" button will not functional at this mode, but you can press and hold this button for over 10 seconds to reset to factory setting.

Application

wireless bridge installation

The 5.8Ghz wireless bridge is powerful network transmitter & receiver for internet share and video surveillance, you can mount it over two building even more, cross the river,railway,highway,lake without wire connection, one pair of outdoor high power and high performance 300Mbps wireless bridges, which works at 5GHz frequency. Supports Point-to-Point and Point-to-Multipoint wireless connection. It is more stable and higher speed and anti-interference performance than 2.4GHz wireless bridge. Moreover, it is easy to manage through the WEB interface.

Parameters

Model: CPE320
Network Interface: 10/100Mbps 2 * LAN Port
Data Rate: 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps / 11n: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M, 65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M, 115.6M, 130M, 144.4Mbps
Power Supply: POE 24V 1.0A
Antenna: 12DBi (5180~5825MHz)
Transmission Range: 2KM / 1.2 miles
Waterproof: IP65
Dust-proof: Support
Working temperature: -4℉~158℉
Dimensions: 170mm * 90mm * 60mm / 6.67'' * 3.55'' * 2.36'
Weight: 0.7kg / 24.7 oz
Write Your Own Review
You're reviewing:Wireless Bridge,5.8GHz 300Mkbps Outdoor CPE Network Extender,Point to Point Access PTP/PTMP Plug & Play Long Range WiFi Extender with High Gain Antenna for Internet or Video Surveillance
Your Rating
© 2021 Wondcam.com. All Rights Reserved.