Wireless Bridge,5.8G Outdoor Point to Point Access PTMP WiFi PTP Network 300Mbps CPE 3KM Transmission Distance 14DBi High-Gain Antenna 2 LAN 100Mbps Ethernet Port 24V PoE Power Supply 2 Pack

$103.99
In stock
SKU
CPE365

Plug & Play Wireless Bridge: the CPE220 is 5.8Ghz long range outdoor WiFi internet network extender with a digital display. It complies with the 802.11a and 802.11n, plug to play for point-to-point auto pair connection without to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless transmission coverage, video stream & data transmit, and wireless monitoring simple and professional.


PTMP Pre-programmed: simply connect the both bridges to PoE adapters through the ethernet cables, system will power on, and wait for 1 minute for the both equipment to pairing and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired succeeded. Great for extend the internet to your garage, barn, store, and warehouse through 5.8Ghz wireless transmission, instead of complicated wire connection.

Long Range & High Speed: the wireless bridges work in 5.8Ghz with 300Mbps wireless transmission rate, support 3KM / 1.86 miles transmission distance(Barrier-free), provide up to 100Mbps wired network speed, extend the networks from one building to another even more, suitable for share internet access, video camera surveillance, or remote network WiFi hot point access (AP mode).

Point to Point Mode: Connect the both wireless bridges to the PoE power adapter will auto pair, no need connect to computer for the complicated configures, at point-to-point mdoe can use for long range video surveillance and internet network sharing, the master bridge output WiFi hot point, you can enter password to get access, extend the WiFi access coverage up to 3KM / 1.86 miles in 60 a degree angle of the front direction.

Point to Multiple Point Mode: suit for the video surveillance DVR system to receives the IP cameras video stream for different building or place, the master bridge connects to the DVR system, and the slave bridges connects to the IP cameras, in this way you can management different building's IP cameras in one system without wiring, you have to connect to computer to configure the master and slave bridge which need some internet knowledge.


Extend the internet network to another building up to 3KM / 1.86 miles through the point-to-point mode. The master bridge connects to the internet source through the LAN port of the PoE power adapter, the slave bridge connects to the router(AP mode) or directly to the computer through the LAN port of the PoE power adapter to expand your network/WiFi to another building, for example: extend your home network to the store, barn, garage and warehouse.

Wireless Bridge CPE355 Kits, Extend your Network form One Building to Another without Wire Connection

wireless bridge 5.8G outdoor CPE

Great for share internet network to a long distance, works as outdoor access point, management video surveillance for different building

The CPE355 kits is one pair of outdoor high power and high performance 300Mbps wireless bridges, which works at 5GHz frequency. Supports Point-to-Point and Point-to-Multipoint wireless connection. It is more stable and higher speed and anti-interference performance than 2.4GHz wireless bridge. Moreover, it is easy to manage through the WEB interface.

CPE355 Kits Function:

A. the device can works as Auto pairing mode: simply to use, connect both bridges to the PoE power adapter to start working, it will auto pair in few minutes. Customize mode: need connect the bridges to the computer through ethernet cable, and configure the master & slave parameters, this mode suit for experienced technician.

B. the device can use for share internet networks to a long distance, output WiFi hot point, also can use for transmit the long ranges IP cameras' video stream to the control center without complicated wiring connection.

C. Auto pairing mode works for point-to-point access connection, customize mode can configure the point to multiple point connection.

CPE355 Kits Application:

1. Share internet networks to a longer distance, the master bridge gets internet and transfer to slave which can connect to router or computer

2. Outdoor access point, the master bridge connects to internet source and output WiFi hot point transmit up to 1.8miles & 60 degrees angle, you can get access the WiFi hot point in this area.

3. Connect the IP cameras from another building without wire connection, you can management the different place IP cameras in one DVR system.

4. Point to multiple point access, you can connect multiple slave bridges, to management more than one building's IP cameras in one DVR system.

Point-to-Point Connection for Extend Internet Network

1.86 mile long range outdoor CPE wireless bridge

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the router through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the computer or router by another ethernet cable

Point-to-Point Connection for Video Surveillance

Point to Point IP Camera Expansion Wireless Bridage

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master wireless bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the switch by another ethernet cable

Point-to-Multiple Point Connection for Video Surveillance

Point to Multiple Moint IP Camera Extender CPE

Connection Guide

The master bridge and slave bridge must be installed by face to face, the antenna is not omnidirectional, it has a 60 degrees transmission angle, the straight installation without blocking objects would be the best performance.

Wireless Bridge Master & Slave Set:

1.Master Bridge Setting

Move the mode switch to "A" position, the device works as master bridge

2.Slave Bridge Setting

Move the mode switch to "B" position, the device works as slave bridge

Wireless Bridge Connection

1.Bridge A Connection - Master Bridge

Step 1: the LAN port of the PoE Adapter connect to the DVR through an ethernet cable.

Step 2: the PoE port of the PoE adapter connect to LAN port of the master bridge by another ethernet cable.

2.Bridge B Connection - Slave Bridge

Step 1: the PoE port of the PoE adapter connect to the LAN port of slave bridge through an ethernet cable

Step 2: the LAN port of the PoE adapter connect to the LAN port of the IP cameras by another ethernet cable

CPE355 Wireless Bridge Interface

Wireless Bridge Interface

Overview

The wireless bridges work by two modes, auto pairing mode with pre-programmed suit for newbie and customize mode suit for experienced user.

Auto pairing mode:

Connect the bridges to the PoE power adapter, the Power LED lamp turns green, system is power on, when both bridges are power on, they will auto pair in a few minutes, during the pairing the LAN status LED lamps all turn green. The digital LED indicator displays the numeric in red color.

You can find a good frequency without interference by pressing the "RST" button to change the channel, short press the button, the LED indicator will display the numeric "0","1","2","3"..."F" one by one, and change in cycle, each numeric means a different frequency, you can find the details in the user manual.

At the auto pairing mode, the bridge also output WiFi hot point, and the access password is pre-programmed in auto paring mode. When the channel changes, the access password changes as well. For example: the WiFi hot point name is CPE5G_5G161, and the default password is zllinkcpe123456161, if the name is CPE5G_5G153, the password will be zllinkcpe123456153. The last three numbers of the password must match the last three numbers of the name.

Customize mode:

At this mode the bridged must be connected to the computer and set different IP addresses and working modes, short press the "RST" button will not functional at this mode, but you can press and hold this button for over 10 seconds to reset to factory setting.

Application

long range network solution

Parameters

Model: CPE355
Network Interface: 10/100Mbps 2 * LAN Port
Data Rate: 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps / 11n: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M, 65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M, 115.6M, 130M, 144.4Mbps
Power Supply: POE 24V 1.0A
Antenna: 14DBi (5180~5825MHz)
Transmittion 1.86 Miles
Waterproof: IP65
Dust-proof: Support
Working temperature: -4℉~158℉
Dimensions: 9.88'' * 3.62'' * 2.36''
Weight: 23 oz
Write Your Own Review
You're reviewing:Wireless Bridge,5.8G Outdoor Point to Point Access PTMP WiFi PTP Network 300Mbps CPE 3KM Transmission Distance 14DBi High-Gain Antenna 2 LAN 100Mbps Ethernet Port 24V PoE Power Supply 2 Pack
Your Rating
© 2021 Wondcam.com. All Rights Reserved.