Skype me!

10-50KM microwave remote wireless video audio transmitter

SKU: WO-T130

Availability: In stock


Quick Overview

10-50KM microwave remote wireless video audio transmitter


Contact on this product

10km transmitter

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 10km transmitter
  • long range transmitter

Details

Specifications

Remote wireless AV transmitter and receiver,
1.Transmission range 10KM,30KM,50KM
2 Frequency:10.7-13.0GHz
3.Support AV signal

10-50KM microwave remote wireless video audio transmitter

 

MICROWAVE WIRELESS VIDEO TRANSMISSION EQUIPMENT

Transmission distance up to 50KM

 

PRODUCT OVERVIEW

The series of ST-6300 microwave AV transmitter can transmit AV signals several ten kilometers away form one place to another. The most advanced GASSFET & technology makes the high quality and stability.

The very low noise figure makes picture clear and enjoyable. This product covers full band of microwave frequency on request and outdoor use available. The specially designed microwave multicarrier transposes (BK/BK Amplifier) with solar cell systems can resolve the problems of blockness of mountains or other objects.

ST-6300 works on FM modulation type (AM type offered on request). Visual and aural signals from camera or other program sources are put into the “Video in ” and “Audio in ” port of the transmitter, they are emitted through the directional or omni-directional antenna. The microwave signals travels several ten kilometers arriving at the receiving point. The microwave receiver changes it back to visual and aural signals. Then a beautiful picture will be obtained on the screen of your monitor.

       INSTALLATION AND CONNECTIONS 

 1.        The RF output port is N-type L 16 or SMA connector, it will be connected with the coaxial cable of  50Ω to the antenna. 

 2.        The video input point is F-type connector. It will be connected by the coaxial cable of  75Ω to the video resource such as camera etc.

 3.        The Audio and +12VDC power input point are all in a 4-pin connecter. The “pin 1” is “+12VDC”. “pin 2” is “audio in”, The “pin 3” and “pin 4” are ground point.

 4.        The diagram of working principle as follows:

                SPECIFICATIONS OF ST-6300

 RF PERFORMANCE 

Frequency:

1.0-1.5GHz(L band), 2.3-2.7GHz(S band), 10.7-13.0GHz(Ku band)optional with dealers

Frequency Stability:

0.0005%(standard)

Modulation

F.M.

Phase [email protected]:

-75dBc

Output Levels:

20-33dBm(Optional)

Output Impedance:

50Ohm

Output Connector:

Type ”SMA” for Ku-band, “l16” for L-Band and S-Band

 

 AURAL PERFORMAN

Audio Input:

600Ohm balanced/unbalanced 0.5v

Pre-Emphasis:

75us/50us

Frequency Response:

50Hz to 15KHz(+/-0.5dB)

Subcarrier Frequency:

6.5MHz

Distortion:

3%

FM Noise:

-50dB  

 VISUAL PERFORMANCE   

Video Input: 

75 Ohm unbalanced, 1.0Volt peak to peak 

Differential Gain: 

5% 

Differential Phase:

5° 

Signal To Noise Ratio:

55dB 

Pre-Emphasis:

CCIR STANDARD PAL 

GENERAL  

Power:

12VDC/300~1500mA

Ambient Temperature:

-15°C-+55°C

Relative Humidity:

0.96%

Dimensions(W×D×H)

12”×9.2”×3.5”

Be the first to review this product

Product contact

Contact Information

  • Refresh

* Required Fields

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.